101 Y. C. Zhou, B. Q.
Chen, X.H. Wang and C.K. Yan
Mechanical properties
of Ti3SiC2 particulate
reinforced copper matrix composites prepared by hot
pressing of Cu-coated Ti3SiC2
and Cu powders
Mater. Sci. and
Tech.20(5) 661-665(2004)
102. Y. C. Zhou, H. B.
Zhang, M. Y. Liu. J. Y. Wang and Y. W. Bao
Preparation of TiC
free Ti3SiC2 by with improved
oxidation resistance by substitution of Si with Al
Mater. Res.
Innovat. 8(2)97-102 (2004)
103. H. B. Zhang, Y.
C. Zhou, Y. W. Bao, M. S. Li
Mechanism for the
enhanced oxidation resistance of Ti3SiC2
by forming a Ti3Si0.9Al0.1C2
solid solution
Acta Mater.
52(12)3631-3637 (2004)
104 R. Z Huang, Y M
Wang, J Y Wang and Y C Zhou
First-principles
investigations of stability and electronic structure
of ZrV2Hx (x=0.5, 1, 2,3,4,6
and 7)
Acta Mater
52(12) 3499-3506 (2004)
105 M. Li, Y. Qian, Y.
Li, Y. Zhou
Beneficial effects of
Ce implantation into preformed Cr2O3
scales on the subsequent oxidation of Ni-20Cr alloy
Oxid. Metal
61(5-6) 529-544 (2004)
106 J. Y. Wang and Y.
C. Zhou
Dependence of elastic
stiffness on electronic band structure of nano-laminate
M2AlC (M=Ti, V, Nb and Cr) ceramics
Phy. Rev. B
69(21)21411(2004)
107 X. M. Liu and Y.
C. Zhou
Seed-mediated
synthesis of uniform ZnO nanorods in the presence of
poly ethylene glycol
J. Crys. Grow.
270(3-4) 527-534 (2004)
108 Y. W. Bao and Y.
C. Zhou
Punch-shear tests and
size effects for evaluating the shear strength of
machinable ceramics
Z Metalkd.
95(5)372-376(2004)
109 Y. W. Bao and Y.
C. Zhou
Mechanical properties
of Ti3SiC2 in bending at high
temperature
Acta Metal. Sinica 17(4)465-470
(2004)
110. X. H. Wang and Y.
C. Zhou
Hot corrosion of Na2SO4-coated
Ti3AlC2 in air at 700-1000oC
J. Electrochem. Soc.,151(9)B505-511
(2004)
111. X. L. Ma, Y. L.
Zhu, X. H. Wang, Y. C. Zhou
Microstructure
characterization of the bulk Ti3AlC2
ceramics
Phil. Mag.
84(28)2969-2977(2004)
112 Y. H. Quan, M. S.
Li, L. Xin and Y. C. Zhou
Investigation of
growth stresses in NiO scale formed on Ni at 1000oC
by a modified deflection method
Mater. Res.
Bull. 39(13)1985-1992(2004)

113 Y. W. Bao and Y.
C. Zhou
Bending creep and
stress relaxation of Ti3AlC2
at high temperature
Key Eng. Mater.
280-283(2005)1373-1378
114. Y. W. Bao, Y. C.
Zhou
Anisotropic
deformation and damage behavior of brittle/ductile
laminated composite in bending at high-temperature
J. Comp. Mater.
39(2)147-162(2005)
115 J. Y Wang, Y. C.
Zhou, Z. J. Lin, F. L. Meng and F. Li
Raman active phonon
modes and lattice heat capacities of Ti2AlC
and Cr2AlC ceramics by first-principles
investigation
Appl. Phys. Lett.
86, 101902(2005)
116 G. M. Liu, M. S.
Li, Y. C. Zhou, Y. M. Zhang
Hot corrosion behavior
of Ti3SiC2 in the mixture of
Na2SO4-NaCl melts
J. Europ. Ceram. Soc.
25(5)1033-1039(2005)
117 Z J Lin, Y. C.
Zhou, M. S. Li and J. Y Wang
Solid-liquid reaction
synthesis of bulk Cr2AlC
Z. Metallkd. 96(3)291-296(2005)
118 X. M. Liu and Y.
C. Zhou
Electrochemical
deposition and characterization of Cu2O
nanowires
Appl. Phys. A 81(4) 685-689
(2005)
119 E. D. Wu, H. B.
Zhang, J. Y. Wang and Y. C. Zhou
Neutron diffraction
studies of Ti3Si0.9Al0.1C2
compound
Mater. Lett. , 59(21)2715-2719
(2005)
120 Y. W. Bao, X. H.
Wang, H. B. Zhang, Y. C. Zhou
Thermal shock behavior
of Ti3AlC2 quenched in air and
in water from 200-1300oC
J. Europ. Ceram.
Soc. 25(14)3367-3374(2005)
121 J. Y. Wang, Y. C.
Zhou and Z. J. Lin
First-principles
elastic stiffness of LaPO4 monazite
Appl.
Phys. Lett. 87, 05192(2005)
122 J. Y. Wang, Y. C.
Zhou, Z. J. Lin, T. Liao
First-principles
investigation on chemical bonding and bulk modulus
of the ternary carbide Zr2Al3C5
Phys Rev B
72, 052102 (2005)
123 X. M. Liu, Y. C.
Zhou
Electrochemical
synthesis and room temperature oxidation behavior of
Cu nanowires
J. Mater. Res.
20(9)2371-2378 (2005)
124 J. Y. Wu and Y. C.
Zhou
Mechanical and
electrical properties of Ti2SnC
dispersion strengthened Cu
Z Metalkd.96(8) 847-852(2005)
125 Y. W.Bao, L. Z.
Liu and Y. C. Zhou
Assessing the elastic
parameters and energy-dissipation capacity of solid
materials: A residual indent may tell you all
Acta Mater
53(18)4857-4862 (2005)
126 F. L. Meng, Y. C.
Zhou, J. Y. Wang
Strengthening of Ti2AlC
by substitution of Ti with V
Scripta Mater. 53(12)1369-1372
(2005)
127 Y. W. Bao and Y.
C. Zhou
Effect of sample size
and testing temperature on the fracture toughness of
Ti3SiC2
Mater. Res.
Innovat. 9(2) 41-42 (2005)
128 J. Y Wu, Y C Zhou,
C. K. Yan and W Wang
Interfacial reaction
during processing of Cu-Ti2SnC composite
Z Metalkd.
96(11)1314-1320(2005)

129 Y. C. Zhou, D T
Wan, Y. W. Bao and J. Y. Wang
In-situ processing and
high-temperature properties of Ti3Si(Al)C2/SiC
composites
Inter. J. Appl.
Ceram. Tech. 3(1)47-54 (2006)
130 M. Zhu, M. S. Li,
Y. L. Li and Y. C. Zhou
Influence of sol-gel
derived Al2O3 film on the
oxidation behavior of a Ti3Al based alloy
Mater. Sci. &
Eng. A 415(1-2) 177-183(2006)
132 Z. J. Lin, M. J.
Zhuo, Y. C. Zhou, M. S. Li, J. Y. Wang
Microstructural
characterization of layered-ternary Ti2AlC
Acta Mater.
54(4)1009-1015(2006)
133 G. M. Liu, M. S.
Li, Y. C. Zhou, Y. M. Zhang
Influence of
pre-oxidation on the hot corrosion of Ti3SiC2
in the mixture of Na2SO4-NaCl
melts
Corro. Sci.
48(3) 650-661 (2005)
134 H. B. Zhang, Y. C.
Zhou, Y. W. Bao, J. Y. Wang
The oxidation behavior
of bulk Ti3SiC2 at
intermediate temperatures in dry air
J Mater. Res.
21(2) 402-408(2006)
135 Y. C. Zhou and J.
X. Chen
Mechanism for the
strengthening of Ti3AlC2 by
incorporation of Si to form Ti3Al1-xSixC2
solid solutions
Acta Mater.
54(5)1317-1322(2006)
136 Y. W. Bao, C. F,.
Hu and Y. C. Zhou
Damage tolerance of
nanolayer-grained ceramic:a quantitative estimation
Mater. Sci. & Tech.
22(2)227-230(2006)
137 Z. J. Lin, Z. M.
Jin, Y. C. Zhou, M. S. Li and J. Y. Wang
Interface
microstructure of Ti3AlC2 and
Al2O3 oxide scale
Scripta Mater.
54(10)1815-1820(2006)
138 Y. W. Bao and Y.
C. Zhou
A new method for
precracking beam for fracture toughness experiments
J Am Ceram Soc.89(3)1118-1121(2006)
139 Z.J. Lin, M. J.
Zhuo, Y. C. Zhou, M. S. Li, J. Y. Wang
Atomic scale
characterization of layered ternary Cr2AlC
ceramic J Appl. Phys.
99(7)076109(2006)
140 J. Y. Wang, Y. C.
Zhou, Z. J. Lin, T. Liao, L. F. He
First-principles
prediction of the mechanical properties and
electronic structure of ternary aluminum carbide Zr3Al3C5
Phys. Rev. B,73(13)No.124107
(2005)
141 H. B Zhang, Y. C.
Zhou and Y. W. Bao
Intermediate phases in
Ti3SiC2 and Ti3Si(Al)C2
solid solutions synthesis from elemental powders
J. Europ. Ceram.
Soc. 26(12)2373-2380(2006)
142 J. Y. Wu, Y. C.
Zhou, and J. Y. Wang
Tribological
behavior of Ti2SnC particulate reinforced
copper matrix composites
Mater. Sci. Eng. A
422(2006)266-271
143 T Liao, J Y Wang
and Y C Zhou
Atomistic deformation
modes and ideal strengths of nano-laminate Ti2AlC
and Ti2AlN from first-principles
investigation
Phys. Rev. B
73, No. 214109(2006)
144 Z. Q. Sun, Y. C.
Zhou, M. S. Li
Low temperature synthesis
and sintering of γ-Y2Si2O7
J. Mater. Res. 21(6) 1443-1450
(2006)
145 J. Y. Wang, Y. C.
Zhou, Z. J. Lin and T. Liao,
Pressure-induced
polymorphism in Al3BC3: a
first-principles study
J. Solid State
Chem. (Rapid Communication), 179
(2006)2703-2707
146 T Liao, J. Y. Wang
and Y. C. Zhou
Basal plane slip
systems and polymorphic phase transformation in Ti2AlC
and Ti2AlN: a first-principles study
J Phys: Condens
Matter. 18(2006)6183-6192
147 Z. J. Lin, M. J.
Zhuo, Y. C. Zhou, M. S. Li, J. Y. Wang
Microstructural
relationships between compounds in the Ti-Si-C
system
Scripta Materiala 55(5) 445-448
(2006))
148 L. Z. Liu, Y. W.
Bao and Y. C. Zhou
Effect of strain
hardening and residual stress in the impression on
the instrumented indentation technique
J. Mater. Res.
21(7)1680-1686(2006)
149 S. W. Duo, M. S.
Li, M. Zhu and Y. C. Zhou
Resistance of
polyimide/silica hybrid films prepared by the
sol-gel process to the atomic oxygen attack
Surface &
Coatings Technology, 200,
6671-6677(2006)
150 J. Y. Wang, Y. C.
Zhou, T. Liao, Z. J. Lin
First-principles
elastic stiffness of Al3BC3: a
metal borocarbide containing short linear BC2
units
Appl. Phys. Lett.
89, No.021917(2006)
151 Z.J. Lin, M. J.
Zhuo, L. F. He, Y. C. Zhou, M. S. Li, J. Y. Wang
Atomic scale
microstructures of Zr2Al3C4
and Zr3Al3C5
ceramics
Acta Mater.
54(14)3843-3851(2006)
152 J. X. Chen, J. L.
Li and Y. C. Zhou
In-situ synthesis of
Ti3AlC2/TiC-Al2O3
composites from TiO2-Al-C system
J. Mater. Sci. Tech.
22(4)455-458(2006)
153 J. X. Chen and Y.
C. Zhoua)
Abnormal thermal
expansion and its effect on high-temperature
mechanical properties of Ti3Al1-xSixC2
solid solutions
Scripta
Mater. 55(8)675-678(2006)
154 Z. J. Lin, M. J.
Zuo, Y. C. Zhou, M. S. Li, and J. Y. Wang
Microstructures and
adhesion of the oxide scale formed on titanium
aluminum carbide substrates
J. Am. Ceram.
Soc. 89(9)2964-2966(2006)
155 J. X. Chen, M. Y.
Liu, Y. W. Bao and Y. C. Zhou
Failure mode dependence
of strengthening effects in Ti3AlC2/10
vol.%Al2O3 composite
Inter. J.
Mater. Res. 2006(8)1115-1118(2006)
156 J. X. Chen and Y.
C. Zhou
Effect of Si Content on
the oxidation resistance of Ti3Al1-xSixC2
(x≤0.25) solid solutions at 100-1400oC in
air
Oxi. Metal
65(1-2) 123-135(2006)
157 H. B. Zhang, Y. C.
Zhou, Y. W. Bao and M.S.Li
Abnormal thermal shock
behavior of Ti3SiC2 and Ti3AlC2
J. Mater. Res. 21(9) 2401-2407
158 X. H. Yin, M. S.
Li and Y. C. Zhou
Microstructure and
mechanical strength of diffusion bonded Ti3SiC2/Ni
joints
J. Mater. Res. 21(9)2415-2421
159 D. T. Wan, Y. C.
Zhou, Y. W. Bao, C. K. Yan
In-situ synthesis and
characterization of TiC free Ti3SiC2/SiC
composites
Ceram. Inter.32(8)
883-890(2006)
160 Z. J., Lin, Y. C.
Zhou, M. S. Li, J. Y. Wang
Hot corrosion and
protection of Ti2AlC against Na2SO4
salt in air J. Europen. Ceram. Soc.
26(6)3871-3879(2006)
161 Z. J. Lin, Y. C.
Zhou, M. S. Li, J. Y. Wang
Improving the Na2SO4-induced
corrosion resistance of Ti3AlC2
by pre-oxidation in air
Corro. Sci.
48(10)3271-3280(2006)
162 T. Liao, J. Y.
Wang and Y. C. Zhou
Why Nb2AsC
shows distinguishable mechanical properties to other
layered ternary carbides: a first-principles study
J. Phys.:
Condens Matter. 18 L527-L533(2006)
163 Z. J. Lin, M. J.
Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang
Structural
characterization of a new layered-ternary Ta4AlC3
J. Mater. Res. 21(10)
2587-2592(2006)
164 C. F. Hu, Y. C.
Zhou, Y. W. Bao, D. T. Wan
Tribological
Properties of Polycrystalline Ti3SiC2
and Al2O3-Reinforced Ti3SiC2
Composites
J.
Am. Ceram. Soc. 89 (11)3456-3461(2006)
165 T. Liao, J. Y.
Wang and Y. C. Zhou
Atomistic deformation
modes and intrinsic brittleness of Al4SiC4:
a first-principles investigation
Phys. Rev. B.
74, No.174112 (2006)
166 Z. J. Lin, M. J.
Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang
Microstructures and
theoretical bulk modulus of layered ternary tantalum
aluminum carbides
J. Am. Ceram.
Soc. 89(12) 3765-3769(2006)
167 G. M. Liu, M. S.
Li and Y. C. Zhou
Effect of Na2SO4
and water vapor on the corrosion of Ti3SiC2
Oxid. Met.
66(1-2):115-125(2006)

168 D. T. Wan, Y. C.
Zhou, C. F. Hu and Y. W. Bao
Improved
strength-impairing contact damages resistance of Ti3Si(Al)C2/SiC
composites
J. Europ.
Ceram. Soc. 27(4) 2069-2076(2007)
169 D. T. Wan, Y. C.
Zhou, Y. W. Bao and L. Z. Lin
Strengthening of soft
ceramics by forming sandwich composites with strong
interfaces- a combination of analytical study and
experimental
J. Am. Ceram.
Soc. 90(2) 553-558(2007)
170 Z.J. Lin, M. S.
Li, and Y. C. Zhou
Review: TEM
investigation on layered ternary ceramics
J. Mater. Sci. Tech.
23(2)145-165(2007)
171 L. F. He, Y. C.
Zhou, Y. W. Bao and J. Y. Wang
Synthesis and
oxidation of Zr3Al3C5
powders Inter. J. Mater. Res.98(2)3-9(2007)
172 D. T. Wan, C. F.
Hu,Y. W. Bao and Y. C. Zhou
Effect of SiC
particles on friction and wear behavior of Ti3Si(AlC2-based
composites Wear
262(7-8)826-832(2007)
173 H. B. Zhang, J.
Zhang, Y. C. Zhou, Y. W. Bao and M. S. Li
Synthesis of AlN
nanowires by nitridation of Ti3Si0.9Al0.1C2
solid solution
J. Mater. Res.
22(3)561-564(2007)
174 C. Li, M.S. Li and
Y.C.Zhou
Improving the surface
hardness and wear resistance of Ti3SiC2
by boronizing
treatment
Surf. Coat.
Tech.201(12)6005-6011(2007)
175 L. F. He, Y. C.
Zhou, Y. W. Bao, Z. J. Lin and J. Y. Wang
Synthesis, physical
and mechanical properties of bulk Zr3AL3C5
ceramic
J. Am. Ceram. Soc.
90(4)1164-1170(2007))
176 Z. J. Lin, M. J.
Zhuo, M. S. Li, J. Y. Wang, and Y. C. Zhou
Synthesis and
microstructure of layered-ternary Ti2AlN
ceramic
Scripta Mater. 56(12) 1115-1118
(2007)
177 B. Liu, J.Y. Wang,
Y.C. Zhou, T. Liao, F.Z. Li
Theoretical elastic
stiffness, structure stability and thermal
conductivity of La2Zr2O7
pyrochlore
Acta Mater.
32(9)2949-2957 (2007)
178 T. P. Li, M. S.
Li, Y. C. Zhou
Phase segregation and
its effect on the adhesion of Cr-Al-N coatings on
K38G alloy prepared by magnetron sputtering method
Surf. Coat.
Technol. 201(18-19)7692-7698 (2007)
179 X. H. Yin, M. S.
Li and Y. C. Zhou
Microstructure and
mechanical strength of transient liquid phase bonded
Ti3SiC2 joints using Al
interlayer
J. Europ.
Ceram. Soc. 27-(12)3539-3544(2007)
180 M. Zhu, M. S. Li,
S. W. Duo and Y. C. Zhou
Improvement on the
oxidation resistance of a Ti3Al based
alloy by Cr1-xAlxN (0≤x≤0.47)
coatings
J. Mater. Sci.
Tech.23(3) 373-378 (2007)
181 J. X. Chen, Y. C.
Zhou, H. B. Zhang, D. T. Wan, M. Y. Liu
Thermal stability of Ti3AlC2/Al2O3
composites in high vacuum
Mater. Chem.
Phys. 104(1)109-122(2007)
182 Y. W. Bao, Y. C.
Zhou, X. X. Bu, Y. Qiu
Evaluating elastic
modulus and strength of hard coatings by relative
method
Mater. Sci. &
Eng. A 458(1-2) 268-274(2007)
183Y. W. Bao, Y. C.
Zhou and H.B. Zhang
Investigation on
reliability of nanolayer-grained Ti3SiC2
via Weibull statistics
J .Mater. Sci. 42 (12)
4470-4475(2007)
184 X. H. Yin, M. S. Li,T.
P. Li and Y. C. Zhou
Diffusion bonding of
Ti3AlC2 ceramic via a Si
interlayer J. Mater. Sci.
42(17)7081-7085(2007)
185 G. M. Liu, M. S.
Li, M. Zhu, Y. C. Zhou
Transient of alumina
oxide scale on NiAl coated on M38G alloy at 950oC
Intermetalics 15(2007)1285-1290
186 J. Zhang, Y. C.
Zhou and J. Y. Wang
Structure stability of
Ti3AlC2 in Cu and
microstructure evolution of Cu-Ti3AlC2
composites
Acta Mater.
55(13)4381-4390(2007)
187 Z. Q. Sun, Y. C.
Zhou, M. S. Li and J. Y. Wang
γ-Y2Si2O7,
a novel machinable silicate ceramic: mechanical
properties and
mchinability
J. Am. Ceram.
Soc 90(8)2535-2541. (2007)
188 C. F. Hu, Z. J.
Lin, L. F. He, Y. W. Bao, J. Y. Wang, M. S. Li and
Y. C. Zhou
Physical and
mechanical properties of bulk Ta4AlC3
ceramic prepared by an in-situ reaction
synthesis/hot pressing method
J. Am. Ceram.
Soc. 90(8) 2542-2548(2007)
189 C. F. Hu, F. Z.
Li, J. Zhang, J. M.. Wang, J. Y. Wang, and Y. C.
Zhou
Nb4AlC3,
a new compound belonging to the MAX phases
Scrip Mater.
57(10)893-896(2007)
190 L. F. He, J. Y.
Wang, Y. W. Bao and Y. C. Zhou
Elastic and thermal
properties of Zr2Al3C4:
experimental investigation and ab initio calculation
J. Appl. Phys.
102(4)No. 043531(2007)
191 T. P. Li, X. H.
Yin, M. S. Li and Y. C. Zhou
Oxidation resistance
of Cr0.5Al0.5N coating
prepared by amagnetron sputtering method on the K38G
alloy
Oxid. Metal
68(3-4)193-210(2007)
192 J. Y. Wang, Y. C.
Zhou and J. Z. Lin
Mechanical properties and
atomistic deformation mechanism of γ-Y2Si2O7
from first-principles investigations
Acta Mate..
55(17)6019-6026(2007)
193 Q. F. Tong, J. Y.
Wang and Y. C. Zhou
Low temperature
synthesis /densification and properties of Si2N2O
with Li2O additive
J. Europ.
Ceram. Soc. 27(16)4767-4772 (2007)
194 P. L. Ke, Q. m.
Wang, W.G. Hua, j. G, C. Sun, Y. C. Zhou
Stress and
microstructural development of thermal barrier
coatings using AIP/D-gun two-step processing
J. Am. Ceram.
Soc. 90(3)936-941(2007)
195 J. Y. Wang, Y. C.
Zhou, T. Liao, Z. J. Lin
Trend in crystal
structure of layered ternary T-AlC carbides (T=Sc,
Ti, V, Cr, Zr, Nb, Mo, Hf, W and Ta)
J. Mater. Res.22(10)
2685-2690(2007)
196 Z. J. Lin, Y. C.
Zhou, M. S. Li
Synthesis,
microstructure, and properties of Cr2AlC
J. Mater. Sci. Tech. 23(6)721-745(2007)
197 Z. J. Lin, M. S.
Li, J. Y. Wang and Y. C. Zhou
High-temperature
oxidation and hot corrosion of Cr2AlC
Acta Mater.
55(18)6182-6191(2007)
198 L. F. He, Z. J.
Lin, J. Y. Wang, Y. W. Bao, M. S. Li, Y. C. Zhou
Synthesis and
characterization of bulk Zr2Al3C4
ceramic
J. Am. Ceram. Soc.
90(11)3687-3689(2007)
199 C Li, M. S.Li and
Y. C. Zhou
In-situ
synthesis and properties of Ti3AlC2/TiB2 composites
J. Am. Ceram. Soc.
90(11)3615-3620(2007)
200 Z. J. Lin, L. F.
He, M. S. Li, J. Y. Wang and Y. C. Zhou
Layered stacking
characteristic of ternary zirconium aluminum
carbides
J. Mater. Res.
22(11)3058-3066(2007)
 |