First-principles elastic stiffness of Al3BC3: a metal borocarbide
containing short linear BC2 units
J. Y. Wang, Y. C. Zhou, Z. J. Lin, T. Liao
Appl. Phys. Lett. 89, No.021917(2006)

Mechanism for the strengthening of Ti3AlC2 by incorporation of Si to
form Ti3Al1-xSixC2 solid solutions
Y.
C. Zhou and J. X. Chen
Acta Mater.
54(5)1317-1322(2006)

Microstructural characterization of
layered-ternary Ti2AlC
Z.
J. Lin, M. J. Zhuo, Y. C. Zhou, M. S. Li, J. Y. Wang
Acta Mater.
54(4)1009-1015(2006)

Atomic-scale microstructures of Zr2Al3C4
and Zr3Al3C5 ceramics
Z. J. Lin, M. J. Zhuo, L.F. He, Y. C. Zhou, M.S. Li, J.Y. Wang
Acta
Mater.,
54(14):3843–3851
(2006)

First-principles prediction of the
mechanical properties and electronic structure of ternary aluminum
carbide Zr3Al3C5
J. Y.
Wang, Y. C. Zhou, Z. J. Lin, T. Liao, L. F. He
Phys. Rev. B,73(13)No.134107
(2006)

Atomistic deformation modes and intrinsic brittleness of Al4SiC4: a
first-principles investigation
T. Liao, J. Y. Wang and Y. C. Zhou
Phys. Rev. B.
74, No.174112 (2006)

Atomistic deformation modes and ideal strengths of nano-laminate Ti2AlC
and Ti2AlN from first-principles investigation
T
Liao, J Y Wang and Y C Zhou
Phys. Rev. B
73, No. 214109(2006)

Atomic scale
characterization of layered ternary Cr2AlC ceramic
Z.J. Lin,
M. J. Zhuo, Y. C. Zhou, M. S. Li, J. Y. WangJ Appl. Phys.
99(7)076109(2006)

Basal plane
slip systems and polymorphic phase transformation in Ti2AlC
and Ti2AlN: a first-principles study
T
Liao, J. Y. Wang and Y. C. Zhou
J Phys: Condens Matter.
18(2006)6183-6192

Superior mechanical properties of Nb2AsC to those of
other layered ternary carbides: a first-principles study
T.
Liao, J. Y. Wang and Y. C. Zhou
J Phys: Condens Matter.
18 (2006)
L527–L533

The
oxidation behavior of bulk Ti3SiC2 at
intermediate temperatures in dry air
H. B. Zhang, Y. C. Zhou, Y. W. Bao, J. Y. Wang
J Mater. Res.
21(2) 402-408(2006)

Structural
characterization of a new layered-ternary Ta4AlC3 ceramic
Z. J. Lin and M. J. Zhuo
J. Mater. Res., 21(10) 2006:2587-2592

Low temperature
synthesis and sintering of
γ-Y2Si2O7
Z. Q. Sun, Y. C. Zhou, M. S. Li
J. Mater. Res. 21(6) 1443-1450 (2006)

Effects of Strain
Hardening and Residual Stress in Impression on the Instrumented
Indentation Technique
L. Z. Liu, Y. W Bao and Y. C. Zhou
J. Mater. Res.,
21(7)1680-1686 (2006)

Microstructure and
mechanical strength of diffusion-bonded Ti3SiC2/Ni joints
X. H. Yin, M. S. Li and Y. C. Zhou
J. Mater. Res.,
21( 9)2415-2421(2006)

Abnormal thermal shock
behavior of Ti3SiC2 and Ti3AlC2
H. B. Zhang, Y.C. Zhou, Y.W. Bao and M.S. Li
J. Mater. Res.,
21( 9)2401-2407(2006)

Tribological Properties of
Polycrystalline Ti3SiC2 and Al2O3-Reinforced Ti3SiC2 Composites
C. F. Hu, Y. C. Zhou, Y. W. Bao, D. T. Wan
J. Am. Ceram. Soc.
89 (11)3456-3461(2006)

Microstructures and
theoretical bulk modulus of layered ternary tantalum aluminum
carbides
Z. J. lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang
J. Am. Ceram. Soc.
89(12) 3765-3769(2006 )

A new method
for precracking beam for fracture toughness experiments
Y. W. Bao and Y. C. Zhou
J Am Ceram Soc.89(3)1118-1121(2006)

Microstructures and Adhesion of the Oxide Scale Formed on Titanium
Aluminum Carbide Substrates
Z. J. Lin,
M. J. Zhuo, Y. C. Zhou, M. S. Li, J. Y. Wang
J. Am. Ceram. Soc.,
89(9)2964-2966(2006)

|