- 1.Hf3AlN: A Novel Layered Ternary Ceramic
with Excellent Damage Tolerance
F.Z. Li, B. Liu, J.Y. Wang, Y.C. Zhou, J. Am. Ceram. Soc.,
93 [1] 228 –234 (2010)
- 2.Mechanical and thermal properties of a Hf2[Al(Si)]4C5
ceramic prepared by in situ reaction/hot-pressing
L.F. He, H.Q. Nian, X.P. Lu, Y.W. Bao and Y.C. Zhou, Scripta
Materialia, 62 (2010) 427–430
- 3.Oxidation Behavior of a Ti3AlC2/TiB2 Composite
at
1000 o -1400oC in Air
M.S. Li, C. Li, J.J. Li, Y.C. Zhou, J. Am. Ceram. Soc.,
93 [2] 554–560 (2010)
- 4.Mechanisms and Kinetics of the Hydrothermal
Oxidation of Bulk Titanium Silicon Carbide
H. B. Zhang, Volker Presser, Christoph Berthold, Klaus Georg Nickel,
X Wang, Christoph Raisch and Thomas Chasse, L. F. He and Y. C.
Zhou, J. Am. Ceram. Soc., 93 [4] 1148–1155 (2010)
- 5.Crystal Structure and Theoretical Elastic Property
of a New Ternary Ceramic HfAl4C4
H. Q. Nian, L. F. He, F. Z. Li, J. Y. Wang and Y.C. Zhou, J.
Am. Ceram. Soc., 93 [4] 1164–1168 (2010)
- 6.Surface strengthening of Ti3SiC2 through magnetron
sputtering Cu and subsequent annealing
H. P. Guo J. Zhang, F. Z. Li, Y. Liu J. J. Yin, Y.C. Zhou,
J. Europ. Ceram. Soc., 28: 2099–2107 (2008)
- 7.Microstructure, mechanical, thermal, and oxidation
properties of a Zr2[Al(Si)]4C5–SiC
composite prepared by in situ reaction/hot-pressing
L. F. He, F. Z. Li, X. P. Lu, Y. W. Bao , Y. C. Zhou, J.
Europ. Ceram. Soc., 30: 2147–2154 (2010)
- 8. Layered Machinable and Electrically Conductive
Ti2AlC and Ti3AlC2 Ceramics:
a Review
X. H. Wang, Y. C. Zhou, J. Mater, Sci. Technol.,
26(5): 385–416 (2010)
- 9.A New Method to Improve the High-Temperature
Mechanical Properties of Ti3SiC2 by Substituting
Ti with Zr, Hf, or Nb
D. T. Wan, L. F. He, L. L. Zheng, J. Zhang, Y. W. Bao, Y. C. Zhou,
J. Am, Ceram. Sci., 93(6): 1749–1753 (2010)
- 10.Variation of microstructure and composition
of the Cr2AlC coating prepared by sputtering at 370
and 500 °C
J.J. Li, L.F. Hu, F.Z. Li, M.S. Li, Y.C. Zhou, Surface &
Coatings Technology 204 (2010) 3838–3845
- 11. Electrophoretic Deposition of Ti3Si(Al)C2
from Aqueous Suspension
Y. Liang, Z. Q. Sun, J. X. Chen, X. X. Liu, Y. C. Zhou, J.
Am, Ceram. Sci., 93 [7] 1916–1921 (2010)
- 12.Theoretical elastic stiffness, structural stability
and thermal conductivity of La2T2O7
(T = Ge, Ti, Sn, Zr, Hf) pyrochlore
B. Liu, J.Y. Wang, F.Z. Li, Y. C. Zhou, Acta Mater.,
58 (2010) 4369–4377
- 13.Reciprocating Friction and Wear Behavior of
Zr2[Al(Si)]4C5 and Zr2[Al(Si)]4C5–SiC
Composite Against Si3N4 Ball
L. Wu, L. F. He, J. X. Chen, X. P. Lu, Yan-chun Zhou, J.
Am. Ceram. Soc., 93 [8] 2369 –2376 (2010)
- 14. Corrosion behavior of Ti3AlC2
in NaOH and H2SO4
D. Li, Y. Liang, X. X. Liu, Y.C. Zhou, J. Europ. Ceram.
Soc., 30 (2010) 3227–3234
- 15.Preparation of Reticulated MAX-Phase Support
with Morphology-Controllable Nanostructured Ceria Coating for
Gas Exhaust Catalyst Devices
Z. Q. Sun, Y. Liang, M. S. Li, Y. C. Zhou, J. Am. Ceram.
Soc., 93 [9] 2591–2597 (2010)
- 16. (Ti0.5Nb0.5)5AlC4:
A New-Layered Compound Belonging to MAX Phases
L. Y. Zheng, J. M. Wang, X. P. Lu, F. Z. Li, J. Y. Wang, Y. C.
Zhou, J. Am. Ceram. Soc., 93 [10] 3068–3071 (2010)
- 17. Oxidation Behavior of Ternary Carbide Ceramics
in Hf–Al–C System in Air
L. F. He, J. J. Li, H. Q. Nian, X. H. Wang, Y. W. Bao, M. S. Li,
J. Y. Wang and Y.C. Zhou, J. Am. Ceram. Soc., 93
[10] 3247–3431(2010)
- 18. In situ Reaction Synthesis and Mechanical
Properties of TaC–TaSi2 Composites
C. F. Hu, L. F. He, F. Z. Li, L. Wu, J. Y. Wang, M. S. Li, Y.
W. Bao, Y.C. Zhou, Int. J. Appl. Ceram. Technol.,
7[6] : 697–703 (2010)
- 19. Pressureless Sintering and Properties of Ti3AlC2
X. P. Lu, Y. C. Zhou, Int. J. Appl. Ceram. Technol.,
7[6] : 744–751 (2010)
- 20. A Novel Method to Make Tough Ti2AlC/Al2O3-
and Ti3AlC2/Al2O3-Laminated
Composites
A. J. Li, Y. C. Zhou, J. Am. Ceram. Soc., 93 [12]
4110–4114(2010)
|
