研究与技术人员

周延春 博士 研究员

Tel: 010-68382478

E-mail: yczhou@imr.ac.cn yczhou714@gmail.com

2002 2002 2003 2004 2005 2006
2007 2008 2009 2010 2011  
           

2007年发表的论文

  • 1. D. T. Wan, Y. C. Zhou, C. F. Hu and Y. W. Bao

    Improved strength-impairing contact damages resistance of Ti3Si(Al)C2/SiC composites

    J. Europ. Ceram. Soc. 27(4) 2069-2076(2007)

  • 2. D. T. Wan, Y. C. Zhou, Y. W. Bao and L. Z. Lin

    Strengthening of soft ceramics by forming sandwich composites with strong interfaces- a combination of analytical study and experimental

    J. Am. Ceram. Soc. 90(2) 553-558(2007)

  • 3. Z.J. Lin, M. S. Li, and Y. C. Zhou

    Review: TEM investigation on layered ternary ceramics  J. Mater. Sci. Tech. 23(2)145-165(2007)

  • 4. L. F. He, Y. C. Zhou, Y. W. Bao and J. Y. Wang

    Synthesis and oxidation of Zr3Al3C5 powders   Inter. J. Mater. Res.98(2)3-9(2007)

  • 5. D. T. Wan, C. F. Hu,Y. W. Bao and Y. C. Zhou

    Effect of SiC particles on friction and wear behavior of Ti3Si(AlC2-based composites  Wear 262(7-8)826-832(2007)

  • 6. H. B. Zhang, J. Zhang, Y. C. Zhou, Y. W. Bao and M. S. Li

    Synthesis of AlN nanowires by nitridation of Ti3Si0.9Al0.1C2 solid solution  J. Mater. Res. 22(3)561-564(2007)

  • 7. C. Li, M.S. Li and Y.C.Zhou

    Improving the surface hardness and wear resistance of Ti3SiC2 by boronizing treatment 

    Surf. Coat. Tech.201(12)6005-6011(2007)

  • 8. L. F. He, Y. C. Zhou, Y. W. Bao, Z. J. Lin and J. Y. Wang

    Synthesis, physical and mechanical properties of bulk Zr3AL3C5 ceramic  J. Am. Ceram. Soc. 90(4)1164-1170(2007))

  • 9. Z. J. Lin, M. J. Zhuo, M. S. Li, J. Y. Wang, and Y. C. Zhou

    Synthesis and microstructure of layered-ternary Ti2AlN ceramic  Scripta Mater. 56(12) 1115-1118 (2007)

  • 10. B. Liu, J.Y. Wang, Y.C. Zhou, T. Liao, F.Z. Li

    Theoretical elastic stiffness, structure stability and thermal conductivity of La2Zr2O7 pyrochlore

    Acta Mater. 32(9)2949-2957 (2007)

  • 11.T. P. Li, M. S. Li, Y. C. Zhou

    Phase segregation and its effect on the adhesion of Cr-Al-N coatings on K38G alloy prepared by magnetron sputtering method

    Surf. Coat. Technol. 201(18-19)7692-7698 (2007)

  • 12. X. H. Yin, M. S. Li and Y. C. Zhou

    Microstructure and mechanical strength of transient liquid phase bonded Ti3SiC2 joints using Al interlayer  

    J. Europ. Ceram. Soc. 27-(12)3539-3544(2007)

  • 13. M. Zhu, M. S. Li, S. W. Duo and Y. C. Zhou

    Improvement on the oxidation resistance of a Ti3Al based alloy by Cr1-xAlxN (0≤x≤0.47) coatings

    J. Mater. Sci. Tech.23(3) 373-378 (2007)

  • 14. J. X. Chen, Y. C. Zhou, H. B. Zhang, D. T. Wan, M. Y. Liu

    Thermal stability of Ti3AlC2/Al2O3 composites in high vacuum  Mater. Chem. Phys. 104(1)109-122(2007)

  • 15. Y. W. Bao, Y. C. Zhou, X. X. Bu, Y. Qiu

    Evaluating elastic modulus and strength of hard coatings by relative method 

    Mater. Sci. & Eng. A 458(1-2) 268-274(2007)

  • 16. Y. W. Bao, Y. C. Zhou and H.B. Zhang

    Investigation on reliability of nanolayer-grained Ti3SiC2 via Weibull statistics  J .Mater. Sci.  42 (12) 4470-4475(2007)

  • 17. X. H. Yin, M. S. Li,T. P. Li and Y. C. Zhou

    Diffusion bonding of Ti3AlC2 ceramic via a Si interlayer  J. Mater. Sci. 42(17)7081-7085(2007)

  • 18. G. M. Liu, M. S. Li, M. Zhu, Y. C. Zhou

    Transient of alumina oxide scale on NiAl coated on M38G alloy at 950oIntermetalics 15(2007)1285-1290

  • 19. J. Zhang, Y. C. Zhou and J. Y. Wang

    Structure stability of Ti3AlC2 in Cu and microstructure evolution of Cu-Ti3AlC2 composites

    Acta Mater. 55(13)4381-4390(2007)

  • 20. Z. Q. Sun, Y. C. Zhou, M. S. Li and J. Y. Wang

    γ-Y2Si2O7, a novel machinable silicate ceramic: mechanical properties and mchinability  

    J. Am. Ceram. Soc 90(8)2535-2541. (2007)

  • 21. C. F. Hu, Z. J. Lin, L. F. He, Y. W. Bao, J. Y. Wang, M. S. Li and Y. C. Zhou

    Physical and mechanical properties of bulk Ta4AlC3 ceramic prepared by an in-situ reaction synthesis/hot pressing method

    J. Am. Ceram. Soc. 90(8) 2542-2548(2007)

  • 22. C. F. Hu, F. Z. Li, J. Zhang, J. M.. Wang, J. Y. Wang, and Y. C. Zhou

    Nb4AlC3, a new compound belonging to the MAX phases   Scrip Mater. 57(10)893-896(2007)

  • 23. L. F. He, J. Y. Wang, Y. W. Bao and Y. C. Zhou

    Elastic and thermal properties of Zr2Al3C4: experimental investigation and ab initio calculation

    J. Appl. Phys. 102(4)No. 043531(2007)

  • 24. T. P. Li, X. H. Yin, M. S. Li and Y. C. Zhou

    Oxidation resistance of Cr0.5Al0.5N coating prepared by amagnetron sputtering method on the K38G alloy

    Oxid. Metal 68(3-4)193-210(2007)

  • 25. J. Y. Wang, Y. C. Zhou and J. Z. Lin

    Mechanical properties and atomistic deformation mechanism of γ-Y2Si2O7 from first-principles investigations

    Acta Mate.. 55(17)6019-6026(2007)

  • 26. Q. F. Tong, J. Y. Wang and Y. C. Zhou

    Low temperature synthesis /densification and properties of Si2N2O with Li2O additive 

    J. Europ. Ceram. Soc. 27(16)4767-4772 (2007)

  • 27. P. L. Ke, Q. m. Wang, W.G. Hua, j. G, C. Sun, Y. C. Zhou

    Stress and microstructural development of thermal barrier coatings using AIP/D-gun two-step processing

    J. Am. Ceram. Soc. 90(3)936-941(2007)

  • 28. J. Y. Wang, Y. C. Zhou, T. Liao, Z. J. Lin

    Trend in crystal structure of layered ternary T-AlC carbides (T=Sc, Ti, V, Cr, Zr, Nb, Mo, Hf, W and Ta)

    J. Mater. Res.22(10) 2685-2690(2007)

  • 29. Z. J. Lin, Y. C. Zhou, M. S. Li

    Synthesis, microstructure, and properties of Cr2AlC   J. Mater. Sci. Tech. 23(6)721-745(2007)

  • 30. Z. J. Lin, M. S. Li, J. Y. Wang and Y. C. Zhou

    High-temperature oxidation and hot corrosion of Cr2AlC  Acta Mater. 55(18)6182-6191(2007)

  • 31. L. F. He, Z. J. Lin, J. Y. Wang, Y. W. Bao, M. S. Li, Y. C. Zhou

    Synthesis and characterization of bulk Zr2Al3C4 ceramic  J. Am. Ceram. Soc. 90(11)3687-3689(2007)

  • 32. C Li, M. S.Li and Y. C. Zhou

      In-situ synthesis and properties of Ti3AlC2/TiB2 composites  J. Am. Ceram. Soc. 90(11)3615-3620(2007)

  • 33. Z. J. Lin, L. F. He, M. S. Li, J. Y. Wang and Y. C. Zhou

    Layered stacking characteristic of ternary zirconium aluminum carbides  J. Mater. Res. 22(11)3058-3066(2007)