研究与技术人员

周延春 博士 研究员

Tel: 010-68382478

E-mail: yczhou@imr.ac.cn yczhou714@gmail.com

2002 2002 2003 2004 2005 2006
2007 2008 2009 2010 2011  
           

2010 年发表的论文

  • Fangzhi Li, Bin Liu, Jingyang Wang, Yan-chun Zhou
    Hf3AlN: A Novel Layered Ternary Ceramic with Excellent Damage Tolerance
    J. Am. Ceram. Soc., 93 [1] 228 –234 (2010)
  • L.F. He, H.Q. Nian, X.P. Lu, Y.W. Bao and Y.C. Zhou
    .Mechanical and thermal properties of a Hf2[Al(Si)]4C5 ceramic prepared by in situ reaction/hot-pressing
    Scripta Materialia, 62 (2010) 427–430
  • Meishuan Li, Chao Li, Jingjing Li, Yanchun Zhou
    Fracture toughness determination of Ti3Si(Al)C2 and Al2O3 using a single gradient notched beam (SGNB) method
    J. Am. Ceram. Soc., 93 [2] 554–560 (2010)
  • H. B. Zhang, Volker Presser, Christoph Berthold, Klaus Georg Nickel, X Wang, Christoph Raisch and Thomas Chasse, L. F. He and Y. C. Zhou
    Mechanisms and Kinetics of the Hydrothermal Oxidation of Bulk Titanium Silicon Carbide
    J. Am. Ceram. Soc., 93 [4] 1148–1155 (2010)
  • H. Q. Nian, L. F. He, F. Z. Li, J. Y. Wang and Y.C. Zhou
    Crystal Structure and Theoretical Elastic Property of a New Ternary Ceramic HfAl4C4
    J. Am. Ceram. Soc., 93 [4] 1164–1168 (2010)
  • H. P. Guo J. Zhang, F. Z. Li, Y. Liu J. J. Yin, Y.C. Zhou
    Surface strengthening of Ti3SiC2 through magnetron sputtering Cu and subsequent annealing
    J. Europ. Ceram. Soc., 28: 2099–2107 (2008)
  • L. F. He, F. Z. Li, X. P. Lu, Y. W. Bao , Y. C. Zhou
    Microstructure, mechanical, thermal, and oxidation properties of a Zr2[Al(Si)]4C5–SiC composite prepared by in situ reaction/hot-pressing
    J. Europ. Ceram. Soc., 30: 2147–2154 (2010)
  • X. H. Wang, Y. C. Zhou
    Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review
    J. Mater, Sci. Technol., 26(5): 385–416 (2010)
  • D. T. Wan, L. F. He, L. L. Zheng, J. Zhang, Y. W. Bao, Y. C. Zhou
    A New Method to Improve the High-Temperature Mechanical Properties of Ti3SiC2 by Substituting Ti with Zr, Hf, or Nb
    J. Am, Ceram. Sci., 93(6): 1749–1753 (2010)
  • J.J. Li, L.F. Hu, F.Z. Li, M.S. Li, Y.C. Zhou
    Variation of microstructure and composition of the Cr2AlC coating prepared by sputtering at 370 and 500 °C
    Surface & Coatings Technology 204 (2010) 3838–3845
  • Y. Liang, Z. Q. Sun, J. X. Chen, X. X. Liu, Y. C. Zhou
    Electrophoretic Deposition of Ti3Si(Al)C2 from Aqueous Suspension
    J. Am, Ceram. Sci., 93 [7] 1916–1921 (2010)
  • B. Liu, J.Y. Wang, F.Z. Li, Y. C. Zhou
    Theoretical elastic stiffness, structural stability and thermal conductivity of La2T2O7 (T = Ge, Ti, Sn, Zr, Hf) pyrochlore
    Acta Mater., 58 (2010) 4369–4377
  • L. Wu, L. F. He, J. X. Chen, X. P. Lu, Y. C. Zhou
    Reciprocating Friction and Wear Behavior of Zr2[Al(Si)]4C5 and Zr2[Al(Si)]4C5–SiC Composite Against Si3N4 Ball
    J. Am. Ceram. Soc., 93 [8] 2369 –2376 (2010)
  • D. Li, Y. Liang, X. X. Liu, Y.C. Zhou
    Corrosion behavior of Ti3AlC2 in NaOH and H2SO4
    J. Europ. Ceram. Soc., 30 (2010) 3227–3234
  • Z. Q. Sun, Y. Liang, M. S. Li, Y. C. Zhou
    Preparation of Reticulated MAX-Phase Support with Morphology-Controllable Nanostructured Ceria Coating for Gas Exhaust Catalyst Devices
    J. Am. Ceram. Soc., 93 [9] 2591–2597 (2010)
  • L. Y. Zheng, J. M. Wang, X. P. Lu, F. Z. Li, J. Y. Wang, Y. C. Zhou
    (Ti0.5Nb0.5)5AlC4: A New-Layered Compound Belonging to MAX Phases
    J. Am. Ceram. Soc., 93 [10] 3068–3071 (2010)
  • L. F. He, J. J. Li, H. Q. Nian, X. H. Wang, Y. W. Bao, M. S. Li, J. Y. Wang and Y.C. Zhou
    Oxidation Behavior of Ternary Carbide Ceramics in Hf–Al–C System in Air
    J. Am. Ceram. Soc., 93 [10] 3247–3431(2010)
  • C. F. Hu, L. F. He, F. Z. Li, L. Wu, J. Y. Wang, M. S. Li, Y. W. Bao, Y.C. Zhou
    In situ Reaction Synthesis and Mechanical Properties of TaC–TaSi2 Composites
    Int. J. Appl. Ceram. Technol., 7[6] : 697–703 (2010)
  • X. P. Lu, Y. C. Zhou
    Pressureless Sintering and Properties of Ti3AlC2
    Int. J. Appl. Ceram. Technol., 7[6] : 744–751 (2010)
  • A. J. Li, Y. C. Zhou
    A Novel Method to Make Tough Ti2AlC/Al2O3- and Ti3AlC2/Al2O3-Laminated Composites
    J. Am. Ceram. Soc., 93 [12] 4110–4114(2010)